Exam Code : JN0-649
Prerequisite Certification : JNCIS-ENT
Delivered by : Pearson VUE
Exam Length : 90 minutes
Exam Type : 65 multiple-choice questions
Software Versions : Junos OS 21.2

Recertification
Juniper certifications are valid for three years. For more information, see Recertification.

Exam Details
Exam questions are derived from the recommended training and the exam resources listed above. Pass/fail status is available immediately after taking the exam. The exam is only provided in English.

Exam Preparation
We recommend the following resources to help you prepare for your exam. However, these resources aren’t required, and using them doesn’t guarantee you’ll pass the exam.

Recommended Training
Advanced Junos Enterprise Routing (AJER)
Advanced Junos Enterprise Switching (AJEX)

Exam Resources
Industry/product knowledge
Juniper TechLibrary

Additional Preparation
Juniper Learning Portal

Exam Objectives
Here’s a high-level view of the skillset required to successfully complete the JNCIP-ENT certification exam.

Examkingdom Juniper JN0-649 Exam pdf,

MCTS Training, MCITP Trainnig

Best Juniper JN0-649 Free downloads , Juniper JN0-649 Dumps at Certkingdom.com

Exam ObjectiveDescription
Interior Gateway Protocols (IGPs)
 

Describe the concepts, operation, or functionality of IGPs

IS-IS
OSPFv2 and OSPFv3
Routing Policy
Given a scenario, demonstrate knowledge of how to configure, troubleshoot, or monitor IGPs
 
BGP
Describe the concepts, operation, or functionality of BGP


BGP route selection process
Next hop resolution
BGP attributes: concept and operation
BGP communities
Load balancing – multipath, multihop, forwarding table
NLRI families: inet and inet6
Advanced BGP options

Given a scenario, demonstrate knowledge of how to configure, troubleshoot, or monitor BGP

Implement BGP routing policy
IP Multicast
 
Describe the concepts, operation, or functionality of IP multicast
Components of IP multicast, including multicast addressing IP multicast traffic flow
Any-Source Multicast (ASM) vs. Source-Specific Multicast (SSM)
RPF – concept and operation
IGMP, IGMP snooping
PIM sparse-mode
Rendezvous point (RP) – concept, operation, discovery,
election
Anycast RP
MSDP
Routing policy and scoping

Given a scenario, demonstrate knowledge of how to configure, troubleshoot, or monitor IP multicast
IGMP, PIM-SM (including SSM)
Implement IP multicast routing policy
 
Ethernet Switching and Spanning Tree
 
Describe the concepts, operation or functionality of advanced Ethernet switching
Filter-based VLANs
Private VLANs
Dynamic VLAN registration using MVRP
Tunnel Layer 2 traffic through Ethernet networks
Layer 2 tunneling using Q-in-Q and L2PT

Given a scenario, demonstrate knowledge of how to configure, troubleshoot, or monitor advanced Ethernet switching
Filter-based VLANs
Dynamic VLAN registration using MVRP
Tunnel Layer 2 traffic through Ethernet networks
Layer 2 tunneling using Q-in-Q and L2PT

Describe the concepts, operation, or functionality of advanced spanning tree protocols, including MSTP or VSTP.

Given a scenario, demonstrate knowledge of how to configure, troubleshoot, or monitor MSTP or VSTP.
Layer 2 Authentication and Access ControlDescribe the operation of various Layer 2 authentication or access control features
Authentication process flow
802.1x – concepts and functionality
MAC RADIUS
Captive portal
Server fail fallback
Guest VLAN
Considerations when using multiple authentication/access control methods

Given a scenario, demonstrate how to configure, troubleshoot, or monitor Layer 2 authentication or access control.
IP Telephony FeaturesDescribe the concepts, operation or functionality of features that facilitate IP telephony deployments
Power over Ethernet (PoE)
LLDP and LLDP-MED
Voice VLAN

Given a scenario, demonstrate how to configure, troubleshoot, or monitor features used to support IP telephony deployments.
Class of service (CoS)Describe the concepts, operation, or functionality of Junos CoS for Layer 2/3 networks
CoS processing on Junos devices
CoS header fields
Forwarding classes
Classification
Packet loss priority
Policers
Schedulers
Drop profiles
Shaping
Rewrite rules

Given a scenario, demonstrate knowledge of how to configure, troubleshoot, or monitor CoS for Layer 2 or 3 networks.
EVPNDescribe the concepts, operation, or functionality of Junos EVPN

Route types (e.g., Type 1, 2 3)
VXLAN
Multi-homing (e.g., active route types)

Given a scenario, demonstrate knowledge of how to configure, troubleshoot, or monitor EVPN.

Sample Questions

QUESTION 1
You are asked to establish interface level authentication for users connecting to your network. You must ensure that only corporate devices, identified by MAC addresses, are allowed to connect and authenticate. Authentication must be handled by a centralized server to increase scalability.
Which authentication method would satisfy this requirement?

A. MAC RADIUS
B. captive portal
C. 802.1X with single-secure supplicant mode
D. 802.1X with multiple supplicant mode

Answer: A

QUESTION 2
You enable the Multiple VLAN Registration Protocol (MVRP) to automate the creation and management of virtual LANs.
Which statement is correct in this scenario?

A. The forbidden mode does not register or declare VLANs.
B. When enabled, MVRP affects all interfaces.
C. Timers dictate when link state changes are propagated.
D. MVRP works with RSTP and VSTP.

Answer: B

QUESTION 3
Which address range is used for source-specific multicast?

A. 239.0.0.0
B. 233.0.0.0
C. 232.0.0.0
D. 224.2.0.0

Answer: C

QUESTION 4
Which three configuration parameters must match on all switches within the same MSTP region? (Choose three.)

A. VLAN to instance mapping
B. revision level
C. configuration name
D. bridge priority
E. region name

Answer: B, C, E

QUESTION 5
Which two statements are correct about the deployment of EVPN-VXLAN on QFX Series devices? (Choose two.)

A. Type 1 route advertisements always have the single-active flag set to 1.
B. Junos OS supports underlay replication for BUM traffic forwarding.
C. Junos OS supports ingress replication for BUM traffic forwarding.
D. Type 1 route advertisements always have the single-active flag set to 0.

Answer: B, C

Click to rate this post!
[Total: 0 Average: 0]